Why Earphones Get Tangled

Earphones are usually stored in a special case or pocket. But the earbuds still get tangled over time because of users who constantly put them on and off, rolling up or folding them for storage, throwing them haphazardly into bags…

However, there is a physical reason why earphones often become a rat’s nest: it has to do with how they’re twisted. The cords of most headphones are wrapped in a clockwise direction — meaning that one side of the cord goes around the other side clockwise as well. This type of wrapping will cause adjacent loops to twist around each other in a counter-clockwise direction (viewed from above). And this tendency for opposite twists to undo each other is what many strings and cables to quickly become a knots.

But there is one type of headphone cord that doesn’t get tangled as easily, and it’s surprisingly simple to make your earphone cords this way.

The best solution to the problem is to turn the earphone clockwise when you store them (only do this when they’re already unwound). This makes adjacent loops in the cord wrap around each other in a clockwise direction , so there’s no risk of tangles or knots.

Not keeping it in a proper case, due to excess length, due to any kind of motion applied, due to less rigidity, not being careful while unwinding, due to diameter, due to damage in the earphones etc.,,

Not Keeping In The Box Properly

Earphones are usually stored in a special case or pocket. However, earbuds still get tangled over time because of users who constantly put them on and off, rolling up or folding them for storage, throwing them haphazardly into bags…This will cause adjacent loops to stick and twist around each other in a clockwise direction (viewed from above) before the earbuds will eventually become a tangled mess.

Not Wrapping It Properly

Not wrapping the earphones properly can cause it to get tangled easily. In this case, you have to be more careful when wrapping the headphone cable around your MP3 player or phone.

Excess Long In The Length

It is very common for users to experience tangling when they have excess long in the length of their headphone cable. The reason behind this problem is that the cables keep on getting entangled when not kept properly. Users should ensure that there is enough slack between them and their devices before using these headphones.

Also, you can test whether this principle works for you by trying it on an old set of headphones where the twist-resistant technique won’t damage anything if it fails. If you follow these steps, your cord should stay mostly untangled without any special equipment or care afterwards.

Purchasing Quality Earphones/ Headphones

Nowadays, the market has a number of great quality earphones available at cheaper prices which are perfect for everyday use. So to get rid of tangling issue, you should buy headphones with an in-line microphone and remote control which provides quick access to volume up/down or music playback options without having to get your phone out.

Due To Any Kind Of Motion Applied In The Earphone

When you constantly move your earphones around, the constant motion of earphone can cause them to get tangled. This happens because motion will cause adjacent loops to stick and twist around each other in a clockwise direction (viewed from above) before the earbuds will eventually become a tangled mess.

Wrapping It Around A Drink Can Cause Tangling

If you always use your headphone on top of can drinks , make sure that you don’t wrap the earphones around them. If you take your headphone off and wrap it around can drinks , then there is a chance that it will twist into knots. So wrapping headphones around can drinks can cause tangling.

Not Spinning The Earphone Cable Properly When Unwinding

When you unwind the earphones, make sure that you spin the earphone cable properly instead of just pulling it straight out. This will prevent any kind of knots or tangles in your headphone cables. You should also stop during this process to untangle any slack cables which get caught up over time.

Checking Out Other Aspects Apart From Checking The Length Of The Cord

Before buying an expensive pair of headphones, users should check out all other aspects like sound quality, comfort, durability etc instead of only checking its length because longer cords generally deliver lower-quality audio due to signal loss and are more likely to tangle. So it is better to buy earphones or headphones with shorter length cord which doesn’t tangle quickly.

Due To Less Rigidity Of The Cable

If you use headphone with less rigidity of the cable, they will get tangled more often and hence they can be difficult to untangle. So it is better to buy earphones or headphones with more rigid cables as they do not tangle as easily as others, thus reducing friction between adjacent turns in the cord and preventing knotting/tangling.

Not Being Careful When Unwinding

When users unwind their headphone cables, make sure that they are careful while doing so because if they yank them out quickly then there is a chance that earphone might break off from the plug end. If this happens then your earphone become useless and you have to purchase new ones which extra money.

Leaving The Cord In The Bottom Of A Bag

If you leave your headphone hanging out of a bag sometimes, there is a chance that they will get tangled due to the weight and other objects in the bag along with the motions applied on them. Also, users should not put their earphones in same compartment as keys, coins etc because if anything small gets inside headphone port then it can cause damage to your device or cables.

Wrapping Your Headphone Around Device Can Cause Tangling

When users wrap their earphones around devices such as laptops/notebooks/ipads , there is a chance that they might end up getting tangled which may also lead to breaking of earphones cord. So it is better to keep your headphone away from any electronic device while not in use.

Not Using A Case To Store Them

If users want their headphones to last long and they don’t want to untangle them all the time, then they should use a case to store them when they are not using them . Because storing headphones in a case keeps them clean and tangle-free.Due to this reason, the headphones last longer.

Not Using A Tie Clip

Sometimes when users place their earphones on table/desk while listening to songs , there is a chance that earphone will get tangled with papers and other things on desk which can cause knotting of cables. To prevent this issue, users should use tie clips so that you can hang your headphones properly and prevent knotting of cables.This tie clips also come in different styles and colors which make them unique.

Problem In The Diameter Of Cable Of The Earphone

If you use headphone with very thick diameter cables, they will get tangled more often and hence they can be difficult to untangle. So it is better to buy earphones or headphones with thinner cables as they do not tangle as easily as others, thus reducing friction between adjacent turns in the cord and preventing knotting/tangling.

Tangled Headphone Wires Can Also Be Due To The Damage In Cables

Wires which got damaged internally can also cause tangling of headphone wires because a damaged wire won’t allow free movement of other parts from one place i.e your earphones from your device. So if you have a lot of money then only go for expensive brands as those companies clearly indicate about their products and external damages won’t be a problem in those products.

Turning Your Head While You Are Listening To Songs Can Cause Tangling

Try to avoid turning your head when you are using earphones because when users turn their head , the movement is transferred to wire . Due to this reason, there is a chance that earphone will get tangled which can cause knotting of cables. So it is better not to turn your head while listening to songs or audiobooks in case if you don’t want tangled headphone wires.