How Do You Set A Tripod Stand?

A tripod stand is a support stand. It has three equal legs, which are used to stand at the center or as an aid in climbing and so on. If you go for camera photography people use tripod stands to take the picture without any shake. Before buying a tripod please ensure that it is right as per your requirement as there are different sizes of them available in the market.

Adjust the legs first, make adjustments, lock legs position,make sure legs come with rubber tips, avoid raising the centre post, secure the release latch….

Adjust The Legs First

First you have to adjust the legs of a tripod stand. If you want to go for a normal shoot, then tighten the knob which is present at the bottom. You can also use small wrench if available to keep it in locked position. Take care while adjusting as sometimes this lock system get loosened and get fallen down from its place due to excess pressure applied by hands or any other part of your body.

Make Adjustment In Leg Angle First

If you are going for a special shoot then make adjustment in leg angle first before tightening knob at the bottom part because mostly tripods provided with three locks system but some come with two locks only so do not apply excess pressure otherwise it will be broken or may fall down from place itself. You have to apply equal pressure on all the three legs otherwise it will be harmful for you.

If You Need To Make It Posture Adjustment Then Lock Legs Position First

If you need posture adjustment then lock the position of legs first before applying any kind of pressurized material or components or tools to this support stand because if you simply tighten the knob then it may harm your tripod due to excess pressure applied by hands, so always take care while using tripods.

Extend The Legs First

Before using a tripod stand you will have to extend the legs first. After extending the legs, you can also lock it according to your need so that it cannot get slipped away while holding heavy objects on it. Start by extending the thickest sections and then go for the thinner section and do not apply excess pressure otherwise it can fall down.

Be Sure The Legs Are Secure

Before using a tripod, you have to ensure that the legs are secure. In most of the tripod stand legs come with rubber tips which hold on to any surface and prevent from slipping away while taking pictures or making videos.

Make Sure Legs Come With Rubber Tips

In some tripod stand only three legs come with a rubber tip at its bottom but in some other tripods all three legs have a rubber tip so if you want to purchase a tripod please check it first because there are different sizes of them available in the market so make sure while going for buying one.

Keep The Tripod Stand Horizontal While Using It

Always keep this support stand horizontal during use otherwise it will get slipped away from place itself due to excess pressure applied by hands or any other part of your body.

Avoid Raising The Centre Post Of Tripod

In some tripod stand there is a centre post which is responsible for keeping this support stand vertical while using it. Avoid raising the centre post otherwise it will be very difficult for you to manage both the parts simultaneously. So, always check your tripod stand before going for photography or video shoots.

Take The Weight Of Your Tripod First Before Using

Before using a tripod please take the weight of this support stand first because sometime they can be heavy due to its material used in its construction so if it is possible then keep lighter object on it. This will help you to handle this support stand easily and also avoid slipping away from place itself just because of heavy load on legs of tripod stand. Always take care while using tripods as per your need.

Remove The Camera Base Plate From The Tripod Stand Before Using It

If you are not using any camera then please remove its base plate from the tripod because in some tripod stand this base plate is fixed with legs so it can be very dangerous for you if you keep heavy objects on it without removing the camera. So, always take care while using tripods by keeping in mind all these points because they are important to know so that nothing bad ever happens.

Attach The Base Plate To The Camera

After using a tripod please attach its base plate to the camera so that it can be used again after some time because every time you have to dismantle this joint between tripod and camera so keep in mind about it.

Place The Camera On The Tripod In Inverted Position

In some tripod stand there is a small knob attached to the top of the centre post which manages its working. This knob helps you to keep your camera in inverted position at times when you have to face any problem while taking pictures or making videos.

So, it can be helpful for you if you use this function in your camera properly because it also saves time and effort just because of a single push against that knob which keeps camera upside down. So, always check out this knob before going for shooting at any place.

Secure The Release Latch

Whenever you are not using your tripod always keep its release latch securely so that no unwanted person can open it. There are some people who have bad intentions so for them, you have to be very careful about their activities because they are after taking your money or valuables by opening this latch without permission of the user. So, always check whether this latch is tightly closed otherwise it can cause harm just because of a single incident.

Always Keep A Lens Cap On Your Camera When Using Tripod

When using a tripod please put a lens cap on your camera because if you do not put this lens cap then there is high tendency that dust particles may come inside the lens and affect its proper working resulting in blurred pictures or videos which will make you very upset. So, keep a proper lens cap on your camera and use it as per your need.

Always Check Tripod And Camera Joint Before Using It

If you are using any kind of tripod stand please always check this joint between tripod and camera because sometimes due to cold weather there is a change in its size which can be dangerous for you if you do not take care of this problem. So, always try to pull the thread of this joint between tripod and camera to make it tight before going for photography or video shoots. Keep all these points in your mind while using tripods keeping everything else aside.

Always Assemble It Properly

Before using a tripod always try to assemble it properly because sometimes due to the manufacturer’s fault the user may experience some problem during shooting which can be very dangerous. So, if you are assembling this support stand for photography or video shoots then always keep in mind that nothing goes wrong while taking pictures of something important.

Tripod Stand Is Not A Toy

Always keep in your mind that tripod stand is not a toy which you use for playing purposes only by putting things on it without any trouble. This stand can cause harm to anyone who tries to open its latch without permission of the user so always take care about every single thing related with tripods. These all points are very important to know about before using it because many accidents happen just because of not knowing about these things properly.

Keep It In Safe Place

A tripod stand is always kept in a safe place as far as possible if its not needed because it can also cause any kind of accident due to which you may be harmed or your camera may fall down and break into pieces leading to heavy loss which nobody wants for sure.

So, keep all these points in your mind and make full use of this support stand because it does not only help you during shoots but also save your time and effort because sometimes there is a necessity at that time when you just have no other option because your camera’s battery has died out or there is some problem with the lens so keeping such conditions in mind please use this tripod stand without thinking about anything else.

Always Keep The Tripod Clean And Dust Free

If you love photography then always keep your tripod clean and dust free because during cleaning tripods can get damaged easily so take care about it and wipe it with wet cloth if it is dust free then don’t worry about it.

keep It Away From Water And Moisture

Always keep your tripod away from water and moisture because if you will use this stand in such a place where there is high chance of contact with water then it can get damaged very badly. So, it is better to keep all these points in your mind before going for photography or video shoots.

Keep Your Tripod Bag Separate From Tripod Stand

At the time of packing your tripod always keep this bag separate from tripod stand because sometimes due to excess weight tripod can get damage easily so why you should take risk. If you will keep this bag separately then even sand particles or any other dust particle will not come on your camera because all these things mostly found at train stations, bus stands and so on which can be very dangerous for cameras.

So, always check out before going any where else just because of some small things which are responsible for big damages so never ignore them while using tripods. Keep in mind that safety comes first than anything else because without safety nobody can live a happy life no matter how much money he has. So, please take all these points into your consideration while using tripods because after reading this article you will get to know about the importance of doing so!